Peddinghaus Raptor Integration
FabSuite can send a cut list to Peddinghaus Raptor for cutting. This eliminates double entry of parts for cutting.
Requirements
- FabSuite 5.2.6 or newer.
- Raptor 20
- File → Import ->iDstv+. If your Raptor has this menu item, you have the proper module
Setup
Enable Peddinghaus integration in FabSuite by choosing Maintenance->Integration Settings->Peddinghaus, then check Enable Peddinghaus Integration. Recommended settings are shown, but can be customized as required for your shop.
Sending a Cut List
To export a Cut List from FabSuite:
Open the Cut List, and click "Send Cut List".
Choose the directory for the generated files.
This exports all cutting details and associated CNC files to a directory of your choosing. Each cutting detail has one .idstv file generated.
Importing the Cut List to Raptor
To import this cut list to Raptor choose File → Import → iDSTV+
Click Add Files.
Select the .idstv files for your cut list.
and click Go.
Raptor imports the iDSTV+ files and CNC files generated by FabSuite.